News

InSite v2.16 ASC is pleased to announce the release of version 2.16 of InSite Seismic Pr...
Itasca
Flac Flac3D
Udec 3Dec
PFC2D PFC3D
Itasca eNewsletter

Acquisition Systems

not signed in
Log In
Richter16

A 16-bit continuous data acquisition and streaming system. High data rates can be directly streamed to the system’s hard disk array which enables several hours of continuous data to be stored.

The unit can be operated in continuous or triggered acquisition mode. Each Richter unit can simultaneously sample (up to 10 MS/s) on 4 channels and multiple units can be synchronised together (master-slave setup) to provide an expanded system with a larger number of channels. Integrated with ASC’s data acquisition (and hardware control) software, the PC-based Richter unit provides a complete data acquisition solution.

Example applications:
  • Microseismic (MS) and acoustic emission (AE) event monitoring.
  • Vibration monitoring.
  • Research and laboratory based high speed data acquisition.

For further specifications please download the data sheet: Richter16 System.

Milne16

A multi-purpose, multi-channel, 16-bit data acquisition system, with simultaneous and synchronous sampling of all input channels.

Milne 16-bit Microseismic Three different versions of the instrument are available with sampling rates of up to 10 MS/s, 20 MS/s or 40 MS/s respectively. The unit is primarily operated in a triggered acquisition mode, with the acquired triggered events stored on the data acquisition system hard drive. Multiple 4-channel data acquisition cards can be synchronised (master-slave setup) together to provide an expandable system with up to a total of 32 channels.

Example applications:
  • Microseismic (MS) and acoustic emission (AE) event monitoring.
  • Vibration monitoring.
  • Research and laboratory based high speed data acquisition.
  • General applications requiring high trigger rates and multichannel triggering.

For further specifications please download the data sheet: Milne16 System.

Cecchi USB Monitoring System

The world’s first USB high-frequency data-acquisition system for ultrasonic, acoustic emission and microseismic monitoring.

Cecchi USB Monitoring System
  • Easy to use, low-cost, low-specification system ideal for a range of applications where high dynamic range and data-acquisition rates are not essential.
  • 12-bit full-waveform data acquisition on a USB interface. Simple plug and play on a laptop PC.
  • Synchronised sampling with 2 to 8-channel options, software selectable sample rates up to 50MHz and voltage ranges between 0.2 and 80V.
  • Software selectable multi-channel triggering, hit-count and ultrasonic surveying using the OMNIBUS options.
  • Software-selectable waveform lengths using on-board memory.

For further specifications please download the data sheet: Cecchi System.

< Return to the home page   ::  Contact Us
Applied Seismology Consultants